Control Unit, Def Heater: Installation
WARNING: This page is about a different car, the 2019 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Install the Diesel Exhaust Fluid (DEF) Heater Control Unit (HCU) (2) and securely tighten the retaining nut (1).
- Connect the DEF HCU wire harness connector (3).
- Install the left rear wheel house. Refer to SHIELD, SPLASH, WHEELHOUSE, INSTALLATION .
- Install the left rear wheel and tire assembly and tighten to the proper torque specification. Refer to TECHNICAL SPECIFICATIONS .
- Lower the vehicle.
- Connect negative battery cable.