Module, Display Screen (DSM): Installation
WARNING: This page is about a different car, the 2019 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Position the Display Screen Module (DSM) to the instrument panel center bezel.
- Install the six screws and tighten securely.
- Install the DSM bracket and install the six screws and tighten them securely.
- Install the instrument panel center bezel. Refer to BEZEL, INSTRUMENT PANEL, CENTER, INSTALLATION .
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.