Module, Fuel Pump Control: Installation
WARNING: This page is about a different car, the 2019 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Position the fuel pump control modules in the mounting bracket.
- Install the fuel pump control module mounting nuts (1) and securely tighten.
- Connect the fuel pump control module wire harness connectors (2) to the module.
- Install the rear carpet assembly. Refer to CARPET, FLOOR, INSTALLATION .
- Install the rear seat. Refer to SEAT, FRONT, INSTALLATION .
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.