Installation - RHD
WARNING: This page is about a different car, the 2019 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Position the HVAC module (3) to the instrument panel reinforcement.
- Install the three screws (2) that secure the HVAC module to the instrument panel reinforcement and tighten securely.
- Connect the wire harness connectors (1) to the HVAC module.
- Install the radio. Refer to RADIO, INSTALLATION .
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
- Initiate the Actuator Calibration function using a scan tool. Refer to STANDARD PROCEDURE .