LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2021 >> Compass Altitude, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Power Transfer Unit (Service Information)) >> Switch, Transfer Case >> Removal And Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Inspect the Select Terrain switch for damage.
  2. Install the Select Terrain switch into the media hub, verifying the retaining clips are properly seated.
  3. Connect the Select Terrain switch wire harness connector.
  4. Install the floor console. Refer to CONSOLE, FLOOR, REMOVAL AND INSTALLATION .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
scientia non olet · About LEMON Manuals