LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2021 >> Compass Trailhawk >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seats (Service Information) >> Switch, Lumbar Control >> Removal And Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Installation

  1. Check that the lumbar control switch is not damaged.
  2. Install the lumbar control switch to the seat side shield.
  3. Connect the wire harness connector to the lumbar control switch.
  4. Install the seat side shield. Refer to SIDE SHIELDS, SEAT CUSHION, FRONT, REMOVAL AND INSTALLATION .
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals