LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2021 >> Compass Trailhawk >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.4L Engine (Service Information) >> Engine Block >> Damper, Vibration >> Removal And Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Installation

GC0164247Courtesy of CHRYSLER GROUP, LLC
  1. Apply clean engine oil to the vibration damper bolt threads and between the bolt head and washer.
  2. Install the vibration damper (1c) and vibration damper bolt (1b). Use the (special tool #9707, Holder, Vibration Damper) (1a) and tighten the bolt (1b) to the proper. Refer to TORQUE SPECIFICATIONS .
  3. Install the serpentine belt. Refer to BELT, SERPENTINE, REMOVAL AND INSTALLATION .
  4. Install the right front wheelhouse splash shield. Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, REMOVAL AND INSTALLATION .
  5. Install the right front tire and wheel assembly. Refer to REMOVAL AND INSTALLATION .
  6. Remove the support and lower the vehicle.
  7. Start the engine and allow to run at idle momentarily. Shut the engine off and reinspect the belt alignment.
scientia non olet · About LEMON Manuals