LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2021 >> Gladiator Mojave, Full Time T/Case Control, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Electronic Control Modules (Service Information)) >> Module, Adaptive Cruise Control (Acc) >> Removal And Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Installation

WARNING: This page is about a different car, the 2022 Chrysler Voyager and 2022 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the ACC module with bracket to the grille and line up properly for installing the fasteners.
  2. Install and tighten the fasteners to secure the bracket with module to the grille.
  3. Install the AGS. Refer to GRILLE, ACTIVE SHUTTER, REMOVAL AND INSTALLATION .
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
  5. Using the scan tool, perform the ACC alignment procedure.
scientia non olet · About LEMON Manuals