Removal And Installation: Removal
WARNING: This page is about a different car, the 2022 Chrysler Voyager and 2022 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The third row fold and stow module is located in the 60 percent seat cushion pan. The following steps should be performed on the 60 percent seat only.
- Operate the fold and stow switch and until the seat is fully stowed. If the seat is unable to power stow, use the manual stow option.NOTE:
The manual stow option can be found in the vehicle Owner's Manual.
- Disconnect and isolate the negative battery cable.
- Using a trim stick, release the clips and remove the seat bottom panel (1).
- Disconnect all electrical connections (1) to the fold and stow module (2).
- Depress the tab (3) while lifting up to remove the fold and stow module from the seat frame bottom.