LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2021 >> Gladiator Mojave, Full Time T/Case Control, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Electronic Control Modules (Service Information)) >> Module, Transmission Control (TCM) >> Removal And Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Removal

WARNING: This page is about a different car, the 2022 Chrysler Voyager and 2022 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the air cleaner assembly. Refer to AIR CLEANER, REMOVAL AND INSTALLATION .
    GC0159257Courtesy of CHRYSLER GROUP, LLC
  3. Disengage the lock (1) holding the wire harness connector to the Transmission Control Module (TCM).
  4. Remove the fasteners that retains the wire harness bracket.
  5. Separate the wire harness connector from the TCM.
    GC0188563Courtesy of CHRYSLER GROUP, LLC
  6. Remove the TCM bolts (1).
  7. Separate the TCM from the vehicle.
scientia non olet · About LEMON Manuals