LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2021 >> Gladiator Mojave, Part Time T/Case Control, Automatic Trans >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution >> Outlet, Power >> Removal And Installation >> Removal And Installation-Front Power Outlet >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal And Installation-Front Power Outlet: Installation

  1. Connect the electrical harness connector to the power outlet receptacle.
  2. Install the power outlet mount ring into the panel.
  3. Align the splines on the outside of the power outlet receptacle base with the grooves on the inside of the mount ring.
  4. Press firmly on the power outlet receptacle base until the retaining bosses of the mount ring are fully engaged in their receptacles.
  5. Connect the negative battery cable(s). Refer to the appropriate service information .
scientia non olet · About LEMON Manuals