Torque Specifications
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | COMMENT |
|---|---|---|---|---|
| Gear Shifter Plate to Floor Pan Bolts | 9 | 80 | ||
| Transmission Bolts | 70 | 52 | - | |
| Flexplate to Crankshaft Bolts | 29 + 51° | 21 + 51° | - | Do not reuse these fasteners. If removed, a NEW fastener must be installed and tightened to specifications. |
| Flexplate to Torque Converter Bolts | 40 | 30 | - | |
948TE INTERNAL TIGHTENING TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | COMMENT |
|---|---|---|---|---|
| Bolt and Washer Assembly - Bellhousing to Bearing Support | 25 | 18 | - | |
| Bellhousing to Case Bolts | 35 | 26 | - | |
| Bellhousing Plug | 23 | 17 | - | |
| Cover to Case Bolts | 15 | 11 | - | |
| Cover Plate to Valve Body Screws | 6 | - | 53 | |
| Detent Spring to Case Bolts | 11 | 8 | - | |
| Dog A Washer to Dog A Inner Piston Screw | 2.8 | - | 25 | |
| Drain Plug | 35 | 26 | - | |
| Filter to Intermediate Plate Support Screw | 10 | - | 88 | |
| Fitting Assembly - Oil Cooler Line | 30 | 22 | - | |
| Inner to Outer Valve Body Bolts | 6 | - | 53 | |
| Intermediate Plate to Bell Screws | 10 | - | 88 | |
| Oil Baffle to Bellhousing Screw | 10 | - | 88 | |
| Oil Supply Tube Bolts | 10 | - | 88 | |
| Output Gear Support to Gear Bearing | 60 | 49 | - | |
| Bolt - Pan to Case- Oil | 10 | - | 88 | |
| Bolt - Park Guide | 4 + 21° | - | 35 + 21° | |
| Park Support to Case Bolt | 13 | - | 111 | |
| Ring Gear to Differential Bolts | 180 | 133 | - | |
| Pump Plate to Bellhousing Bolts | 25 | 18 | - | |
| Valve Body to Case Bolts | 8 | - | 71 | |
| Valve Body Bolts | 6 | - | 53 | |
| Bolt and Washer Assembly - Bellhousing to Intermediate Shaft | 25 | 18 | - | |
| Stake-Nut | 60 | 49 | - | |
| Plug - Oil Fill | 23 | 17 | - | |
| Solenoid Wire Harness Connector to Valve Body Screws | 6 | - | 51 | |
| Solenoid Retaining Plate to Valve Body Screws | 6 | - | 53 | |
| Speed Sensor to Transmission Case Bolt | 6 | - | 53 |