LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2022 >> Cherokee Trailhawk >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (2.0L Cooling System) >> Engine >> Sensor, Coolant Temperature >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sensor, Coolant Temperature: Installation

WARNING: This page is about a different variant/trim than selected.
GC0186450Courtesy of CHRYSLER GROUP, LLC
  1. Install the engine coolant temperature sensor (1) and tighten to the proper specifications. Refer to TORQUE SPECIFICATIONS  .
    GC0186474Courtesy of CHRYSLER GROUP, LLC
  2. Connect the engine coolant temperature sensor harness connector (1).
  3. Fill the cooling system. Refer to COOLING SYSTEM FILL 2.0L GMET4  .
  4. Install the engine cover. Refer to COVER, ENGINE, INSTALLATION .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
scientia non olet · About LEMON Manuals