LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2022 >> Cherokee X >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Electronic Control Modules (Service Information) >> Module, Global Telematics Box >> Installation >> Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Global Telematics Box: Installation: Module

GC0192264Courtesy of CHRYSLER GROUP, LLC
  1. Position the Global Telematics Box Module (TBM2) (3) to the instrument panel bracket.
  2. Install the four screws (2) for the TBM2 and tighten the screws securely.
  3. Connect the instrument panel wire harness connectors and antenna connectors (1).
  4. Install the radio. Refer to RADIO, INSTALLATION .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
    NOTE:

    If this Electronic Control Unit (ECU) is being replaced with a new unit, a diagnostic scan tool MUST be used to determine if alignment of the PROXI configuration data into the new ECU is needed. If PROXI alignment is needed, follow the routine outlined in the diagnostic scan tool for PROXI Configuration Alignment under the Body Control Module (BCM) Miscellaneous Functions menu.

scientia non olet · About LEMON Manuals