Module, Global Telematics Box: Removal: Module
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- Remove the radio. Refer to RADIO, REMOVAL .
- Disconnect the instrument panel wire harness connector and antenna connectors (1) from the Global Telematics Box Module (TBM2) (3).
- Remove the four screws (2) from the TBM2 that secure the TBM2 (3) to the instrument panel bracket.
- Remove the TBM2 (3) from the vehicle.