Backup Battery: Installation
WARNING: This page is about a different car, the 2021 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
- Position the backup battery to the EAM and connect the positive battery connector first, then connect the negative battery connector.
- Gently insert the backup battery into the EAM.
- Install the backup battery cover.
- Install the EAM into the vehicle. Refer to MODULE, EMERGENCY ASSISTANCE (EAM), REMOVAL AND INSTALLATION or MODULE, GLOBAL TELEMATICS BOX, REMOVAL AND INSTALLATION .
- Start the engine and check if "Service Required" indicator or message on the Instrumental Panel Cluster (IPC) turns off.