LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2022 >> Compass Red >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Electronic Control Modules (Service Information)) >> Module, Emergency Assistance (EAM) >> Removal And Installation >> Speaker >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Speaker: Installation

WARNING: This page is about a different car, the 2021 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the EAM speaker close to the instrument panel.
  2. Connect the instrument panel wiring harness connector.
  3. Install and tighten the two screws for the EAM. Tighten the screws securely.
  4. Install the defrost grille. Refer to GRILLE, DEFROSTER, REMOVAL AND INSTALLATION .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.