Sensor, TMAP-Intake Manifold: Installation
WARNING: This page is about a different variant/trim than selected.
- Install the TMAP sensor (3) complete with NEW O-ring and securely tighten the screw (2).
- Connect the TMAP sensor wire harness connector (1).
- Install OBD vent valve. Refer to SOLENOID, EVAPORATIVE EMISSIONS PURGE, INSTALLATION .
- Install the engine covers. Refer to COVER, ENGINE, INSTALLATION .
- Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.