Diagnostic Test
CHECK FOR AN ACTIVE DTC
- Turn the ignition on.
- Press the Rear Washer Switch twice.
- With the scan tool, read DTCs.
Does the scan tool display this DTC as active?
Yes
- If the Rear Washer Switch is free of any debris or foreign material that may cause a stuck switch, replace the Steering Column Control Module (SCCM) in accordance with the Service Information. Refer to MODULE, STEERING COLUMN CONTROL (SCCM), REMOVAL and MODULE, STEERING COLUMN CONTROL (SCCM), INSTALLATION .
- Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .
No
- Test complete. The condition or conditions that originally set this DTC are not present at this time.
- Perform the appropriate TESTING FOR AN INTERMITTENT diagnostic procedure. Refer to TESTING FOR AN INTERMITTENT CONDITION .