Diagnostic Test
CHECK FOR AN ACTIVE DTC
- With the scan tool, read the Steering Column Control Module (SCCM) DTCs and record on the repair order.
Is the DTC active?
Yes
- If the Downshift Paddle Shift Switch is free of any debris or foreign material that may cause a stuck switch. If no problem is found, replace the Steering Column Control Module (SCCM) in accordance with the Service Information. Refer to MODULE, STEERING COLUMN CONTROL (SCCM), REMOVAL and MODULE, STEERING COLUMN CONTROL (SCCM), INSTALLATION .
- Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .
No
- Test complete. The condition or conditions that originally set this DTC are not present at this time.
- Perform the appropriate TESTING FOR AN INTERMITTENT diagnostic procedure. Refer to TESTING FOR AN INTERMITTENT CONDITION .