LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2023 >> Grand Wagoneer Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Electronic Control Modules (Service Information) (2 Of 2) >> Module, Power Side Step (PSSM) >> Module Programming >> PSSM Programming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

PSSM Programming

Please perform the following steps when the Power Side Step Module (PSSM) has been replaced:

  1. Connect the diagnostic scan tool to the vehicle.
  2. Perform the vehicle PROXI Alignment procedure.
  3. Navigate to the PSSM "Misc. Functions" menu to select and perform the hard reset routine.
  4. While in the PSSM menu, enable/configure the PSSM function.

After replacement of the PSSM, the vehicle needs to be driven. During the drive, ensure the vehicle odometer is above 3 kilometers (2 miles) and the speed is above 16 km/h (10 mph) at least once.

scientia non olet · About LEMON Manuals