LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2024 >> Compass Latitude >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Electronic Control Modules (Service Information) (2 Of 2) >> Module, Powertrain Control (Pcm) >> Removal And Installation >> Powertrain Control Module (Pcm)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Powertrain Control Module (Pcm)

  1. Remove the air cleaner body. Refer to BODY, AIR CLEANER, REMOVAL AND INSTALLATION .
  2. Disconnect and isolate the negative battery cable.
  3. Disconnect ans set aside the degas hose from the pressurized coolant bottle.
    GC0206821Courtesy of CHRYSLER GROUP, LLC
    1 - PCM Retaining Nut
    2 - PCM Wire Harness Connector
    3 - Wire Harness Connector
    4 - Wire Harness Securing Tab
    5 - Main Engine Wire Harness Connector
  4. Disconnect the Powertrain Control Module (PCM) electrical connectors.
  5. Release the Wire Harness from the PCM bracket.
  6. Remove the PCM retaining nuts.
  7. Remove the PCM from the vehicle.
scientia non olet · About LEMON Manuals