Diagnostic Test

CHECK FOR AN ACTIVE DTC
1. With the scan tool, read OCM DTCs and record on the repair order.
2. Record the Environmental Data.
3. With the scan tool, erase DTCs.
4. Using the recorded Environmental Data, along with the When Monitored and Set Conditions above, operate the vehicle in the conditions that set the DTC.
5. With the scan tool, read OCM DTCs.
  Did the DTC return?
  
  Yes
  - Go To 2
  No
  - Perform the RESTRAINTS SYSTEM INTERMITTENT TEST. Refer to: RESTRAINTS SYSTEM INTERMITTENT TEST .
CHECK BCM COUNTRY CODE AND VEHICLE LINE
1. Using the scan tool, check for the correct Country Code, Vehicle Line, and Body Style.
  Does the Vehicle Configuration in the BCM match the Vehicle Configuration in the ORC?
  
  Yes
  - Replace the Occupant Classification Module (OCM) in accordance with Service Information. Refer to MODULE, OCCUPANT CLASSIFICATION (OCM), REMOVAL AND INSTALLATION .
  - Perform the Occupant Classification Module (OCM) Verification Test. Refer to: OCCUPANT CLASSIFICATION MODULE (OCM) VERIFICATION TEST .
  No
  - Perform the BODY VERIFICATION TEST. Refer to: BODY VERIFICATION TEST .
  - Perform the RESTRAINTS SYSTEM VERIFICATION TEST. Refer to: RESTRAINTS SYSTEM VERIFICATION TEST .