(Occupant Classification Module (OCM) - Electrical Diagnostics)

• Diagnostic Code Index
• DTC Troubleshooting
  • B0052-01 Passenger SEATBELT Sensor - General Electrical Failure
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • B0061-13 Passenger SEATBELT Tension Sensor - Circuit Open
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • B0061-16 Passenger SEATBELT Tension Sensor - Circuit Voltage Below Threshold
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • B0061-17 Passenger SEATBELT Tension Sensor - Circuit Voltage Above Threshold
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • B0061-2A Passenger SEATBELT Tension Sensor Stuck
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • B1B9D-00 Bladder Fluid Level Low
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • B1BA8-00 System Out Of Calibration/Not Calibrated
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • B1C31-00 Occupant Classification Calibration Range Performance
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • B2206-00 Current VIN Missing - Mismatch
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • B2212-00 Occupant Classification Module Internal
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • B222A-00 Vehicle Line Mismatch
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
  • U0001-00 High Speed Can Communication Bus
  • U0002-00 Can C Bus Off Performance
  • U0140-00 Lost Communication With Body Control Module
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Possible Causes
    • Diagnostic Test
  • U0151-00 Lost Communication With Occupant Restraint Controller
    • Theory Of Operation
    • When Monitored
    • Set Condition
    • Default Action
    • Possible Causes
    • Diagnostic Test
• Standard Procedure
  • Occupant Classification Module Intermittent Test
    • Notes
    • Diagnostic Intermittent Test
  • Restraints System Pre-Diagnostic Procedure
    • Notes
    • Diagnostic Pre-Test
  • OCM System Verification Test (Empty Seat Relearn Procedure)
    • OCM System Verification Test (OCM Relearn Procedure)
  • Occupant Classification Module (OCM) Verification Test
    • Diagnostic Verification Test