Powertrain Control Module (Pcm)
POWERTRAIN CONTROL MODULE (PCM)
| Refer to COMPONENT INDEX . |
The PCM interfaces with several nodes on the BUS network to support ACC with Stop and Go operation as well as the conventional Cruise Control operation.
Inputs
- ACC engaged status from the ABS module
- Fuel shut off, fuel economy measure, disable signal from ABS module
- Vehicle configuration information from the BCM
- DASM requested torque management requests from the ABS module
- DASM acceleration and deceleration request from the ABS module
- APPS indicating driver interaction with the pedal
Outputs
- Cruise Control override signal to the DASM
- Engine torque status and management requests to the DASM
- Accelerator pedal position status to the DASM
- RPM status to the DASM
- Transmission torque status to the DASM
- Engine configuration information to the DASM
- ESS status, if equipped, to the DASM
- Engine in limp home mode status to the DASM