CVPM Programming
The Central Vision Processing Module (CVPM) will need to be programmed when service is performed on any of the surround view cameras or the CVPM itself. The calibration routine is located in the "Surround View Camera" selection. Navigate to the "Misc. Functions" tab and select the "CVPM Service Calibration" routine to begin the calibration process.
NOTE:
To run this routine, all exterior mirrors must be fully extended and all of the doors must be closed. The vehicle will need to be driven between 3 and 13 kilometers/hour (km/h) 2 and 8 miles per hour (mph) in a straight line. The camera is looking for features such as paint lines, other vehicles or other physical objects. It is recommended to perform the calibration in a parking lot environment.