AVC Programming
Active Vibration Cancellation (AVC) programming, when required, is performed using the diagnostic scan tool.
- Using the diagnostic scan tool, navigate to the AVC module.
- Select the "Misc. Functions" menu.
- Select the "AVC Transfer Function Learning" routine.
- Follow the on screen prompts.
As seen on the wiTECH introduction page screen, the vehicle must meet the following criteria to perform this routine:
- Ignition is in the RUN position.
- Engine Revolution Per Minutes (RPM) are at zero.
- Vehicle speed is at 0 miles per hour (mph).
- Vehicle is currently on a non-vibrating flat surface.