U1932-86 Operational Mode Status Signal From Body Control Module - Signal Invalid

NOTE:

The Scan Tool may display the description name of this Diagnostic Trouble Code differently with the following below:

U1932-86 OPERATIONAL MODE STATUS SIGNAL FROM CAN - SIGNAL INVALID

NOTE:

This DTC indicates a communication issue has occurred between the Sending control module (Body Control Module - BCM) and the Reporting control module(s) that set this fault.

NOTE:

Treat this DTC as a IMPLAUSIBLE SIGNAL DTC when performing the COMMUNICATION DIAGNOSTIC PROCEDURE.

The COMMUNICATION DIAGNOSTIC PROCEDURE MUST be performed before replacing any component(s) or module(s). Perform the COMMUNICATION DIAGNOSTIC PROCEDURE. Refer to: COMMUNICATION DIAGNOSTIC PROCEDURE .