Master Power Window Switch
Turn ignition off. Disconnect master power window switch harness connector. Using an ohmmeter, check for continuity between specified switch terminals while operating switch. See MASTER POWER WINDOW SWITCH CONTINUITY . SeeFig 1 . Replace master power window switch if continuity is not as specified.
MASTER POWER WINDOW SWITCH CONTINUITY
| Switch Condition | Between Terminals No. | |
|---|---|---|
| Left Front | ||
| UP | 3 & 7; 5 & 12 | |
| OFF | 3, 5 & 7 | |
| DOWN | 3 & 12; 5 & 7 | |
| Right Front | ||
| UP | 2 & 12; 7 & 9 | |
| OFF | 2, 7 & 9 | |
| DOWN | 2 & 7; 9 & 12 | |
| Right Rear | ||
| UP | 7 & 14; 12 & 13 | |
| OFF | 7, 13 & 14 | |
| DOWN | 7 & 13; 12 & 14 | |
| Left Rear | ||
| UP | 7 & 11; 10 & 12 | |
| OFF | 7, 10 & 11 | |
| DOWN | 7 & 10; 11 & 12 | |