LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 1996 >> Sephia GS, 1.6 3 >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Alignment Procedures >> Toe-In Adjustment
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Toe-In Adjustment

  1. Ensure riding height, camber and caster are within specifications. Measure toe-in of front and rear wheels. If adjustment is necessary, loosen tie rod end lock nuts. Turn tie rod adjusting sleeve to bring toe-in to desired specification. See Fig 1 or Fig 2 . See WHEEL ALIGNMENT SPECIFICATION  table.
  2. Tighten lock nuts to specification. Jounce vehicle and ensure that toe-in adjustment remained at desired specification. See TORQUE SPECIFICATIONS  . Repeat as necessary.
Fig 1: Adjusting Front Toe-In
G96C20877Courtesy of KIA MOTORS AMERICA, INC.
Fig 2: Adjusting Rear Toe-In
G96I20881Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals