Spark Plug: Service and Repair

Removal/Installation

Description:

1. Remove and install the spark plug wires carefully.

CAUTION: When the spark plug lead is to be pulled off, pull the boot itself, not the wire.

2. Remove and install the spark plug with a plug socket.





* NOTICE: Be sure the socket is fitted squarely over the spark plug.

3. Apply anti-seize compound or molybdenum-based lubricant to the spark plug threads.
4. Tighten the spark plug to the specified torque.

Spark plug Tightening torque: 11-17 ft-lb (15-23 N.m)