Cruise Control Switch
At combination switch, disconnect 4-pin connector leading to cruise control switch. Ensure continuity exists between specified terminals of cruise control switch connector with switch activated. See CRUISE CONTROL SWITCH CONTINUITY TEST table. See Fig 1. If continuity does not exist, replace cruise control switch.
CRUISE CONTROL SWITCH CONTINUITY TEST
| Application & Switch Position | Continuity Between Terminals No. | |
|---|---|---|
| Sephia & Spectra | ||
| SET/COAST | 2 & 3 | |
| RESUME/ACCEL | 1 & 2 | |
| Sportage | ||
| SET/COAST | 1 & 2 | |
| RESUME/ACCEL | 2 & 3 | |