Main Control Valve Body: Reassembly
WARNING: This page is about a different car, the 2001 Kia Rio. However, it is still accessible from the selected car via links, so may be relevant.
- Insert 3-4 shift spring, 3-4 shift valve, and stop plug. Secure them with stop pin.
- Insert low reducing spring, low reducing valve, an stop plug. Secure them with stop pin.
- Insert 1-2 shift spring, 1-2 shift valve, and stop plug. Secure them with stop pin.
- Insert pressure regulator valve, pressure regulator spring, pressure regulator spring seat, regulator plug sleeve, pressure regulator plug, and stop plug. Secure them with roll pin.
- Insert 2-3 timing valve and 2-3 timing spring. Secure them with spring retainer.
- Proceed to insert manual valve.