Monitor SCANTOOL Data

Ignition "ON" & Engine "OFF".
Disconnect IAT sensor connector.
Connect Scantool and monitor the "INT.AIR TEMP. SNSR (V)" parameter on the Scantool data list.
Specification: Approx. 5V

Fig 1: Scan Tool Display - INTAKE AIR TEMPERATURE SENSOR
Courtesy of KIA MOTORS AMERICA, INC.
Is displayed IAT data near the specified value.?
YES
- Possibility of sensor malfunction. Go to "COMPONENT INSPECTION " procedure.
NO
- Possibility of signal circuit short to ground. Go to SIGNAL CIRCUIT INSPECTION procedure.