Specifications Index
AMANTI SPECIFICATIONS INDEX
| System | Specification/Procedure | |
|---|---|---|
| Air Conditioning | ||
| Service | SPECIFICATION | |
| Torque | N/A | |
| Axle Nut/Hub Nut | 148-207 ft. lbs. (200-280 N.m) | |
| Battery | CHARGING SYSTEM | |
| Brakes | ||
| Bleeding Sequence | BLEEDING OF BRAKE SYSTEM | |
| Disc Brakes | SPECIFICATIONS | |
| Drum Brakes | SPECIFICATIONS | |
| Torque | TIGHTENING TORQUE | |
| Charging | ||
| Generator | CHARGING SYSTEM | |
| Torque | N/A | |
| Drive Belts | ||
| Adjustment | INSPECTION | |
| Belt Routing | INSTALLATION | |
| Engine Cooling | ||
| General Service Specifications | SPECIFICATIONS | |
| Radiator Cap Pressure | 14-18 psi | |
| Thermostat R & I | THERMOSTAT | |
| Water Pump R & I | WATER PUMP | |
| Engine Mechanical | ||
| Compression | COMPRESSION PRESSURE | |
| Oil Pressure | With engine at operating temperature, oil pressure should be 19 psi (1.32 kg/cm2 ) at 1000 RPM. | |
| Overhaul | SPECIFICATIONS | |
| Torque | TIGHTENING TORQUE | |
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | |
| Flywheel/Flexplate Torque | 53-56 ft. lbs. (72-75 N.m) | |
| Fuel System | ||
| Fuel Filter Location | COMPONENTS | |
| Fuel Filter Removal & Installation | REMOVAL (INCLUDING FUEL FILTER AND FUEL PRESSURE REGULATOR) | |
| Pressure Specification | FUEL PUMP | |
| Fuel Pressure Test Procedure | FUEL PRESSURE TEST | |
| Fuel Pressure Release Procedure | FUEL PRESSURE TEST | |
| Ignition | ||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | |
| Spark Plugs | COMPONENTS | |
| Starting | ||
| Starter | STARTING SYSTEM | |
| Torque | N/A | |
| Wheel Alignment | ||
| Adjustment Specifications | WHEEL ALIGNMENT | |
| Torque | For front suspension, refer to FRONT SUSPENSION . For rear suspension, refer to REAR SUSPENSION . | |
| Wheel & Tire | ||
| Lug Nut Torque | 66-81 ft. lbs. (90-110 N.m) | |