Power Window Main Switch Inspection

Disconnect the negative (-) battery terminal.
Remove the front door trim panel. (Refer to FRONT DOOR )
Disconnect the 14P connector from the switch.

Fig 1: Identifying 14P Connector From Switch
Courtesy of KIA MOTORS AMERICA, INC.
Check for continuity between the terminals in each switch position according to the table. If the continuity condition is not normal, replace the switch.

Fig 2: Terminal Position - Continuity Chart
Courtesy of KIA MOTORS AMERICA, INC.

POWER WINDOW LOCK SWITCH

Fig 3: Terminal Position - Power Window Lock Switch Chart
Courtesy of KIA MOTORS AMERICA, INC.