Cruise Control Main Switch: Installation

WARNING: This page is about a different car, the 2006 Lexus IS 350 and 2006 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL CRUISE CONTROL MAIN SWITCH
1. Install the cruise control main switch with the 2 screws.
  Torque: 1.7 to 3.0 N*m (17 to 31 kgf*cm, 15 to 27 in.*lbf)
2. Connect the connector.
INSTALL STEERING PAD (See INSTALLATION )
INSTALL NO. 3 LOWER STEERING WHEEL COVER
INSTALL NO. 2 LOWER STEERING WHEEL COVER
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Fig 1: Identifying Cruise Control Main Switch With 2 Screws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
PERFORM INITIALIZATION
NOTE: Some systems need initialization when disconnecting the cable from the negative battery terminal (See INITIALIZATION ).
INSPECT SRS WARNING LIGHT
(See PROBLEM SYMPTOMS TABLE )