Distance Control Ecu: Removal: Notes

WARNING: This page is about a different car, the 2006 Lexus IS 350 and 2006 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation (See AIRBAG SYSTEM ).
REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (See REMOVAL )
REMOVE DISTANCE CONTROL ECU
1. Disconnect the connector.
2. Remove the nut and the distance control ECU.

Fig 1: Identifying Nut Of Distance Control ECU

Fig 2: Identifying Distance Control ECU With Nut