DTC P0113 Intake Air Temperature Sens0R1 Circuit High Input: DTC Detecting Condition

DTC DETECTING CONDITION AND POSSIBLE CAUSES

Item	Detecting Condition	Possible Cause
DTC Strategy	Signal check, high	Poor connection Open or short to power in signal circuit Open in ground circuit IATS ECM/PCM
Enable Conditions	Idle and no fuel cut-off Time after engine start > 28s Integrated air mass > 1.0 kg (2.2 lb) Increase of measured temp, after start < 3.0°C (37.4 °F)
Threshold Value	Measured temperature < -39.0 °C (-38.2°F)
Diagnostic Time	2 sec
MIL ON Condition	2 driving cycle