Section 5 (Charging System): Alternator: Disassembly

WARNING: This page is about a different car, the 2007 Kia Sedona and 2006 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.

Remove the generator cover (A) using a screw driver (B).

Fig 1: Identifying Generator Cover
Courtesy of KIA MOTORS AMERICA, INC.
Remove the slip ring guide (A).
Loosen the mounting bolts (B) and disconnect the brush holder assembly (C).

Fig 2: Identifying Slip Ring Guide And Mounting Bolts
Courtesy of KIA MOTORS AMERICA, INC.
Remove the rectifier (A) with 4 screw.

Fig 3: Identifying Rectifier
Courtesy of KIA MOTORS AMERICA, INC.
Remove the nut, pulley (A) and spacer.

Fig 4: Identifying Pulley
Courtesy of KIA MOTORS AMERICA, INC.
Loosen the 4 nuts (A).

Fig 5: Identifying Bolts
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the rotor (A) and cover (B).

Fig 6: Identifying Rotor And Cover
Courtesy of KIA MOTORS AMERICA, INC.
Reassembly is the reverse order of disassembly.