Manual Transaxle Shift Control System: Installation

Install the shift cable and select cable after locating the shift lever and select lever at the neutral position.
NOTE: When operating lever of body side, check secure operation of lever of transaxle side after assembly.
Install the snap pins (2EA) of transaxle side.

Fig 1: Identifying Snap Pins (2EA)
Courtesy of KIA MOTORS AMERICA, INC.
Install the shift lever assembly.
TORQUE: 9-14Nm (90-140kgf.cm, 6-9.5lb.ft)

Fig 2: Identifying Shift Lever Assembly
Courtesy of KIA MOTORS AMERICA, INC.
Install the shift cable and select cable to the shift lever side.
NOTE: Adjust the cable length with select cable adjuster (A) in "N" position before installing the center console.

Fig 3: Identifying Cable Adjuster
Courtesy of KIA MOTORS AMERICA, INC.
Install the center console. (Refer to INTERIOR .)