Control Circuit Inspection

Check for open in harness
1. Ignition "OFF"
2. Disconnect SMARTRA.
3. Ignition "ON" & Engine "OFF"
4. Measure voltage value between terminal "69" of SMARTRA and chassis ground.
  ■ Specification : Approx. 11V
  
  Fig 1: Measuring Voltage Value Between Terminal 69 Of SMARTRA And Chassis Ground
  Courtesy of KIA MOTORS AMERICA, INC.
5. Is the measured voltage within specifications?
  YES
  
  Go to "COMPONENT INSPECTION " procedure
  
  NO
  
  Check for open or short in harness. Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.