LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2007 >> Sedona Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> BCM (Body Control Module) >> Body Network System >> Functions >> Exterior Lighting Functions >> Auto Light Function
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Auto Light Function

  1. The Auto light function is active when the Head lamp switch is positioned to `Auto' and the Key is in RUN position.

    The auto light sensor is powered on the status ACC, START and RUN of the key position. Based on the Auto light sensor values corresponding to the exterior brightness level, it controls automatically the lighting of the Park and tail lamps or/and the Head lamps Low Beam depending on the country.

  2. Auto light Sensor detection table
    AUTO LIGHT SENSOR DETECTION

    Mode Tail Lamps Head Lamps Low Beam
    Lux (Lux) Voltage(V) Lux (Lux) Voltage(V)
    ON < 24 ± 5.2 < 1.77 ± 0.08V Same as Tail lamps
    OFF > 48 ± 10.5 > 3.47 ± 0.1V Same as Tail lamps
scientia non olet · About LEMON Manuals