LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2007 >> Sedona EX >> Repair and Diagnosis >> Brakes >> Traction Control >> Abs (Anti-Lock Brake System) >> Front Wheel Speed Sensor >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Wheel Speed Sensor: Inspection

  1. Measure the output voltage between the terminal of the wheel speed sensor and the body ground.
    CAUTION: In order to protect the wheel speed sensor, when measuring output voltage, a 75Ω resistor must be used as shown.
    Fig 1: Measuring Output Voltage Between Terminal Of Wheel Speed Sensor And Body Ground
    G04883910Courtesy of KIA MOTORS AMERICA, INC.
  2. Compare the change of the output voltage of the wheel speed sensor to the normal change of the output voltage as shown below.
    Fig 2: Wheel Speed Sensor Output Voltage Graph
    G04883911Courtesy of KIA MOTORS AMERICA, INC.
    • V_Low: 0.44 V ~ 0.63 V
    • V_High: 0.885 V ~ 1.26 V
    • Frequency range: 1 ~2,500 Hz
scientia non olet · About LEMON Manuals