Brake Line: Installation

WARNING: This page is about a different car, the 2007 Kia Optima, 2007 Kia Magentis, 2006 Kia Optima, and 2006 Kia Magentis. However, it is still accessible from the selected car via links, so may be relevant.

Install a brake hose (A) on the caliper with tightening brake hose bolt (C) and washer (B).

Fig 1: Removing/Installing Brake Hose At Caliper
Courtesy of KIA MOTORS AMERICA, INC.
Connect the brake hose (A) to the brake line (C) using a flare-nut wrench (B).

Fig 2: Disconnecting/Connecting Brake Hose And Brake Line With Flare-Nut Wrench
Courtesy of KIA MOTORS AMERICA, INC.
Install the brake hose clip (B) to the brake hose bracket.

Fig 3: Identifying Brake Hose Clip And Brake Hose
Courtesy of KIA MOTORS AMERICA, INC.
After installing the brake hose, bleed the brake system.
CAUTION:
- Check the brake hoses for interference and twisting.
- Check the brake hose and line joint for leaks, and tighten if necessary.