LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2008 >> Optima EX, 2.7 4 >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> DTC Troubleshooting Procedures (2 Of 2) - 2.7L >> DTC P061B Internal Control Module Torque Calculation Performance >> Monitor DTC Status
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Monitor DTC Status

  1. Connect scan tool to Data Link Connector (DLC).
  2. IG "ON".
  3. Select "Diagnostic Trouble Codes (DTCs)" mode, and then Press F4(DTAL) to check DTC's information from the DTCs menu
  4. Read "DTC Status" parameter.
    Fig 1: Scan Tool Display DTC Status
    G04804533Courtesy of KIA MOTORS AMERICA, INC.
  5. Is parameter displayed "Present fault"?

    YES  : --> Diagnose and repair as necessary.

    NO  : --> Fault is intermittent, go to "VERIFICATION OF VEHICLE REPAIR " procedure.

scientia non olet · About LEMON Manuals