LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2008 >> Rio Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (SRS Control System) >> Front Impact Sensor (FIS) >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Impact Sensor (FIS): Installation

WARNING: This page is about a different car, the 2008 Kia Optima and 2008 Kia Magentis. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Do not turn the ignition switch ON and do not contact the battery cable while replacing the front impact sensor.
  1. Install the new Front Impact Sensor and sensor bracket cover.
  2. Tighten the Front Impact Sensor mounting bolt.

    Tightening torque: 1.0-1.4 kgf.m (10.2-13.8 N.m, 7.5-10.2 lb.ft)

  3. Install the front bumper. Refer to FRONT BUMPER .
  4. Reconnect the battery negative cable.
  5. After installing the Front Impact Sensor, confirm proper system operation: Turn the ignition switch ON the SRS indicator light should be turned on for about 6 seconds and then go off.
scientia non olet · About LEMON Manuals