LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2008 >> Sedona Base >> Repair and Diagnosis >> Engine Performance >> System >> DTC Troubleshooting Procedures (2 Of 2) >> DTC P0501 Vehicle Speed Sensor A Range/Performance >> Monitor Scan Tool Data
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Monitor Scan Tool Data

  1. Ignition "OFF"
  2. Connect scan tool and Engine "ON"
  3. Drive vehicle in gear and monitor "vehicle speed" item on the scan tool.
    Fig 1: Scan Tool Display Screen - Vehicle Speed
    G04883499Courtesy of KIA MOTORS AMERICA, INC.
  4. Are those "VSS" parameters displayed correctly?

    YES 

    • Fault is intermittent caused by poor contact in Sensor's and/or PCM's connector or was repaired and PCM memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure

    NO 

scientia non olet · About LEMON Manuals