LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2009 >> Amanti >> Repair and Diagnosis >> Brakes >> Traction Control >> Abs (Anti-Lock Brake System) >> Troubleshooting >> Hi-Scan (Pro) Check >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Hi-Scan (Pro) Check: Notes

  1. Turn the ignition OFF.
  2. Connect the Hi-Scan (Pro) to the Data Link Connector located underneath the lower crash pad panel.
  3. Turn the ignition ON.
  4. Use the Hi-Scan (Pro) to check for diagnostic trouble codes.
  5. After completion of the repair or correction of the problem, erase the stored fault codes using the clear key on the Hi-Scan (Pro).
  6. Disconnect the Hi-Scan (Pro).
Fig 1: Connecting Hi-Scan (Pro) To Data Link Connector
G06406750Courtesy of KIA MOTORS AMERICA, INC.
Fig 2: Identifying Data Link Connector
G06406751Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals