Repair Procedures: Installation

Tighten the four mounting bolts after installing the clock spring and steering wheel angle sensor.
CAUTION: Turn clock spring and angular sensor to the end of both direction, return to the opposite direction two and a half rounds. Install the steering wheel after aligning clock spring and angle sensor to be "><" form

Fig 1: Locating Steering Wheel Angle Sensor And Mounting Bolts
Courtesy of KIA MOTORS AMERICA, INC.
Install the steering wheel.
Tighten the steering wheel nut.
Tightening torque: 40~50 N.m (4.0~5.0 kgf.m, 28.9~36.9 lb-ft)

Fig 2: Locating Steering Wheel Nut
Courtesy of KIA MOTORS AMERICA, INC.
Tighten two bolts after installing the air module.
Tightening torque: 8~11 N.m (0.8~1.1 kgf.m, 5.6~7.0 lb-ft)

Fig 3: Locating Air Module And Bolts
Courtesy of KIA MOTORS AMERICA, INC.